Conservation Laws in Physics: How to Use Energy, Momentum, and Charge in Problems
conservation lawsenergylinear momentumangular momentumelectric chargeworked examplesphysics problem solvingexam preparation

Conservation Laws in Physics: How to Use Energy, Momentum, and Charge in Problems

PPhysics Direct Editorial Team
2026-11-10
8 min read

Learn which conservation law to use in collisions, orbits, circuits, explosions, and particle problems, with checks and worked examples.

Conservation laws turn many physics problems into a question of choosing the right system and tracking the right quantity. This guide compares energy, linear momentum, angular momentum, and electric charge, then gives a reusable decision checklist and worked examples for collisions, explosions, orbits, circuits, and particle interactions.

Overview

A conservation law says that a physical quantity remains constant for an appropriately defined system. The phrase “appropriately defined” matters: energy may move into or out of your chosen system, momentum may be transferred by an external force, and angular momentum may change when an external torque acts. Before selecting an equation, define the system and identify what crosses its boundary.

LawQuantity conservedUse it whenKey condition or assumption
EnergyTotal energy, including kinetic, potential, thermal, chemical, and other formsInitial and final states are easier to describe than the detailed forces or motionAccount for every relevant energy transfer; mechanical energy alone is conserved only when no net nonconservative work or thermal conversion is unaccounted for
Linear momentump = mvCollisions, explosions, recoil, and short interactionsNet external impulse on the system is zero or negligible during the interval
Angular momentumL = r × p, or L = Iω for a rigid body about a fixed axisOrbital motion, rotation, and motion about a point or axisNet external torque about the chosen origin or axis is zero or negligible
Electric chargeTotal charge, QCircuits, charging processes, and particle reactionsCharge cannot appear or disappear within a closed system; current into a node must balance current out

These laws can apply at the same time. For example, a collision may conserve total energy and linear momentum, while kinetic energy is not conserved because some becomes sound, deformation, or heat. In an orbital problem, both energy and angular momentum may be useful. Conservation laws do not replace force laws or definitions; they help you choose equations that connect the initial and final states efficiently.

A reusable equation-selection workflow

  1. Describe the event. Is it a collision, separation, orbit, circuit change, or reaction?
  2. Choose the system. Include all objects whose interactions you want to treat as internal.
  3. Choose the interval or reference point. Momentum is often applied over a short time; angular momentum depends on an origin or axis.
  4. List external transfers. Check external impulse, external work, heat, torque, and electrical current.
  5. Write the conservation equation symbolically first. Substitute numbers only after signs, directions, and terms are clear.
  6. Check units, limiting cases, and plausibility. A conservation equation can be algebraically correct but physically incomplete.

Checklist by scenario

Collision: start with linear momentum

For two objects colliding on a frictionless track, choose both objects as the system. If the external impulse is negligible, write

m₁v₁ᵢ + m₂v₂ᵢ = m₁v₁f + m₂v₂f.

Use signs for direction rather than treating all speeds as positive. If the objects stick together, add the condition v₁f = v₂f. If the collision is elastic, kinetic energy is also conserved:

½m₁v₁ᵢ² + ½m₂v₂ᵢ² = ½m₁v₁f² + ½m₂v₂f².

For an inelastic collision, do not impose kinetic-energy conservation. Total energy still remains conserved, but some initial kinetic energy may become internal energy, sound, or deformation.

Explosion or recoil: use momentum, then energy if needed

If an object initially at rest breaks into two pieces, the initial momentum is zero. With negligible external impulse,

m₁v₁ + m₂v₂ = 0.

Therefore the momenta have equal magnitudes and opposite directions: m₁|v₁| = m₂|v₂|. The lighter piece moves faster. Do not conclude that kinetic energy is zero; energy released by chemical, elastic, or nuclear processes can become kinetic energy. Use an energy equation only if the problem supplies enough information about the released or converted energy.

Orbital motion: check angular momentum and energy

For motion under a central force, such as an idealized gravitational orbit, the force points along the radius. Its torque about the center is zero, so angular momentum about that point is conserved:

L = r × p.

For planar motion, this often gives mr₁v₁ = mr₂v₂ when the velocity is perpendicular to the radius at the compared positions. The mass cancels for one orbiting object, leaving r₁v₁ = r₂v₂ in that special case. Mechanical energy can also be conserved when the gravitational interaction is modeled as conservative:

½mv² + U(r) = constant.

Use the angular-momentum equation for a change in tangential speed or distance from the center; use energy when the problem relates speed to position. State the reference point and the force model explicitly.

Circuits: apply charge conservation at nodes

At an ideal circuit junction, charge does not accumulate indefinitely. The current entering equals the current leaving:

ΣI_in = ΣI_out.

This is the practical form of charge conservation used in Kirchhoff’s junction rule. For a single loop, energy conservation leads to a separate loop equation: the algebraic sum of potential changes is zero. A battery transfers chemical energy to electrical energy, and resistors convert electrical energy into thermal energy. Thus charge conservation explains current balance at a node, while energy conservation explains voltage changes around a loop. Keep those roles distinct.

Particle interaction: conserve charge first, then inspect other quantities

In a particle reaction, add the electric charge of all incoming particles and compare it with the total charge of all outgoing particles. For example, a reaction represented schematically as A + B → C + D must satisfy q_A + q_B = q_C + q_D. You may then test conservation of energy and momentum, and—depending on the course level and interaction—other quantum numbers. A particle chart such as Standard Model Particles Explained can help identify particle charges before writing the reaction equation.

What to double-check

  • System boundary: If friction is internal to the chosen system, mechanical energy lost to friction has become internal energy within that system. If the surface is outside the system, energy has crossed the boundary as work or heat.
  • Direction and signs: Momentum is a vector. Choose a positive direction and keep it throughout the calculation. Angular momentum also depends on orientation.
  • External impulse: A brief collision may justify momentum conservation even when external forces exist, provided their impulse is small compared with the collision impulse.
  • External torque: Angular momentum is conserved about a particular origin only when the net external torque about that origin is zero or negligible.
  • Energy category: Total energy is conserved more broadly than kinetic or mechanical energy. Include thermal, chemical, elastic, radiation, and gravitational terms when relevant.
  • Units: Momentum has units of kilogram-metres per second, energy has units of joules, charge has units of coulombs, and angular momentum has units of kilogram-metres squared per second.
  • Independent checks: Compare your result with limiting cases. If one mass becomes extremely large, if friction vanishes, or if an angle becomes zero, does the equation behave sensibly?

For a broader method involving diagrams, units, and uncertainty, see How to Solve Physics Problems. After solving, use the checks in How to Check Whether a Physics Result Is Plausible.

Common mistakes

  1. Using “energy is conserved” to conserve kinetic energy. Kinetic energy is only one form of energy. In a sticky collision, total energy is conserved while kinetic energy decreases.
  2. Choosing a system that excludes the object exerting the important force. If a surface, spring, or second object is outside the system, its work or impulse must be included.
  3. Ignoring vectors in one-dimensional momentum problems. A rebound is not represented by two positive speeds; the reversed velocity needs the opposite sign.
  4. Conserving momentum in every situation. External forces can change the system’s momentum. Ask whether their impulse over the stated interval is negligible.
  5. Conserving angular momentum without naming the axis. The same motion can have different angular momentum about different origins.
  6. Confusing current with charge. Current is the rate of charge flow, I = ΔQ/Δt. Charge conservation at a junction does not mean current is identical everywhere in a circuit with branches.
  7. Adding equations without counting unknowns. Write the unknown quantities and available independent equations before calculating. An extra conservation law may not provide independent information.

When to revisit

Return to this checklist whenever a new problem changes the system, time interval, reference point, or physical model. In particular, revisit it before solving a mixed-topic homework set, during physics exam preparation, or when a problem introduces friction, an external push, a branch in a circuit, a noncentral force, or an energy release.

It is also worth reviewing after a first attempt if the answer has the wrong units, an impossible direction, an unexpected sign, or a scale that conflicts with the setup. For lab work, update the conservation equation when measurements reveal a previously neglected transfer such as heat, drag, electrical resistance, or material deformation. A clear lab report should explain that adjustment rather than silently changing the model; the Physics Lab Report Format guide provides a useful structure for presenting that reasoning.

Before submitting any solution, use this final five-question check:

  1. What exactly is my system?
  2. Which quantity is expected to be conserved, and why?
  3. What external transfer or torque could invalidate the simple equation?
  4. Have I used vectors, signs, units, and the correct reference point?
  5. Does the result satisfy both the physics and the limiting-case check?

If those questions have clear answers, your equation choice is usually on solid ground. Conservation laws are most useful not as formulas to memorize, but as a disciplined way to decide what the problem allows to change and what it does not.

Related Topics

#conservation laws#energy#linear momentum#angular momentum#electric charge#worked examples#physics problem solving#exam preparation
P

Physics Direct Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.