This unit-aware physics formula reference organizes essential equations for mechanics, waves, electricity, and thermodynamics. Use it to identify the right relationship, define every symbol, check units, rearrange safely, and decide whether an equation actually applies to your problem.
Overview
A formula is not a substitute for a physical model. Before choosing an equation, identify what is changing, what is known, what is being measured, and which assumptions describe the situation. A reliable physics formula sheet should therefore answer four questions:
- What does the equation describe?
- What do the symbols mean?
- Which units belong in the calculation?
- When does the equation stop being valid?
Use SI units unless a problem explicitly requires another system: metres (m), kilograms (kg), seconds (s), amperes (A), kelvin (K), and derived units such as newtons (N), joules (J), watts (W), volts (V), and ohms (Ω). Convert quantities before substituting them. For example, centimetres must become metres, grams must become kilograms, and degrees Celsius must be converted to kelvin when using absolute-temperature formulas.
For a broader list of equations, see the physics formulas cheat sheet by topic. For a deeper check on units and algebra, use the guide to dimensional analysis in physics.
Checklist by scenario
1. Motion and forces
For constant-acceleration motion in one dimension, the most useful kinematics equations are:
- v = u + at, where u is initial velocity, v is final velocity, a is constant acceleration, and t is time.
- s = ut + ½at², where s is displacement.
- v² = u² + 2as, useful when time is not given.
- s = ½(u + v)t, which uses average velocity for constant acceleration.
Check that acceleration is constant and that your signs are consistent. Choose a positive direction before substituting values. A negative velocity or displacement is not automatically an error; it may indicate motion opposite to the chosen positive direction. The detailed SUVAT guide explains how to select among these equations.
For forces, use ΣF = ma. The symbol Σ means the vector sum of all forces in the chosen direction. Common force models include weight, W = mg, where g is gravitational field strength, and spring force, F = −kx, where k is spring constant and x is extension from equilibrium. The minus sign in the spring equation indicates that the restoring force opposes the displacement.
Before applying Newton’s second law, draw a free-body diagram. Include forces acting on the selected object, not forces that the object exerts on other objects. The free-body diagram guide is useful for checking normal forces, tension, friction, and components on slopes.
2. Energy, work, and momentum
Use energy methods when the path or time is less important than the initial and final states:
- Kinetic energy: K = ½mv².
- Gravitational potential energy near Earth’s surface: Ug = mgh.
- Work by a constant force: W = Fd cos θ, where θ is the angle between force and displacement.
- Power: P = W/t or, for a force acting on an object with velocity, P = Fv cos θ.
- Momentum: p = mv.
- Impulse: J = Δp = FΔt for a constant force, or more generally the area under a force–time graph.
Mechanical energy is conserved only when the relevant non-conservative work, such as frictional work, is included or is negligible. Momentum conservation requires that the net external impulse on the system be zero or small enough to ignore. Define the system before deciding which conservation law applies.
3. Waves and oscillations
For a repeating wave, use v = fλ, where v is wave speed, f is frequency in hertz, and λ is wavelength in metres. Frequency and period are related by f = 1/T. Do not confuse wave speed with the speed of individual particles in a medium; those are different quantities in many wave systems.
For simple harmonic motion, displacement can be represented by x = A cos(ωt + φ), where A is amplitude, ω is angular frequency in radians per second, and φ is phase constant. The relationships ω = 2πf and T = 2π/ω connect angular frequency, frequency, and period. These equations assume ideal simple harmonic motion; damping and driving may require a different model.
4. Electricity and circuits
Start with charge, current, potential difference, and resistance:
- I = ΔQ/Δt, where current is the rate of charge flow.
- V = W/Q, defining potential difference as energy transferred per unit charge.
- V = IR, Ohm’s law for an ohmic component under conditions where its resistance remains effectively constant.
- P = IV = I²R = V²/R, with the chosen form depending on which variables are known.
- Q = It when current is constant.
For resistors in series, the equivalent resistance is Rtotal = R1 + R2 + …. For parallel resistors, 1/Rtotal = 1/R1 + 1/R2 + …. In a series circuit, current is the same through each component; in a parallel circuit, potential difference is the same across each branch. These rules help prevent the common mistake of applying the wrong equivalent-resistance formula.
5. Thermodynamics and fluids
Useful thermodynamics formulas include:
- Q = mcΔT for thermal energy transferred during a temperature change, where c is specific heat capacity.
- Q = mL during a phase change at constant temperature, where L is specific latent heat.
- PV = nRT for an ideal gas, where n is amount in moles and T is absolute temperature.
- ΔU = Q − W when W means work done by the system. If your course defines W as work done on the system, the sign convention changes.
Use kelvin in gas-law calculations. For fluids, density is ρ = m/V, pressure is p = F/A, and hydrostatic pressure change is commonly written Δp = ρgΔh for a fluid of constant density. State whether your pressure is gauge pressure or absolute pressure before combining it with another pressure.
What to double-check
Before calculating, run this short verification:
- List knowns and unknowns. Give each quantity a symbol and unit.
- Write the equation symbolically first. Rearrange before inserting numbers.
- Check assumptions. Look for phrases such as constant acceleration, negligible air resistance, ideal gas, uniform field, or steady current.
- Check dimensions. Both sides of an equation must have the same physical dimensions. Energy cannot equal a quantity with units of force, for example.
- Estimate the result. An order-of-magnitude estimate can reveal a misplaced prefix or calculator error.
- Interpret the sign and precision. Explain what a negative result means and avoid reporting more significant figures than the data supports.
For experimental work, do not treat the formula result as the whole answer. Record uncertainty, show units, and compare the result with the expected physical scale. The guide to analyzing physics lab data covers uncertainty, graphs, best-fit lines, and error discussion.
Common mistakes
- Using a memorized equation without checking its conditions. The kinematics equations above require constant acceleration; they are not universal motion formulas.
- Mixing scalar and vector quantities. Speed has no direction, while velocity does. Force and displacement require direction when signs or components matter.
- Confusing mass and weight. Mass is measured in kilograms; weight is a force measured in newtons and depends on gravitational field strength.
- Forgetting squared units. A centimetre-to-metre conversion must be squared when the quantity is an area and cubed when it is a volume.
- Dropping signs in energy and thermodynamics. Write your sign convention before using work, heat, or potential-energy changes.
- Using degrees Celsius in an ideal-gas equation. Convert to kelvin because the equation uses absolute temperature.
- Rounding too early. Keep extra digits during intermediate steps and round the final answer appropriately.
- Substituting numbers before rearranging. A symbolic rearrangement makes the required relationship visible and reduces algebraic errors.
When to revisit
Return to this formula reference before each new unit, homework set, laboratory session, and exam revision cycle. Update your personal version when your course introduces a new sign convention, notation system, approximation, or preferred method. A formula sheet is most useful when it reflects the assumptions and symbols used in your current class rather than presenting equations as disconnected facts.
When you encounter a difficult problem, use this final action checklist:
- Sketch the situation and choose a coordinate direction.
- Write the known values with SI units.
- Identify the governing principle: Newton’s laws, conservation of energy, momentum, wave relationships, circuit laws, or a thermodynamic model.
- Write and rearrange the equation before inserting values.
- Check dimensions, sign, scale, and significant figures.
- Explain the result in words, including what it means physically.
Use representative practice problems after this checklist rather than rereading formulas passively. For calculations involving measured data, follow up with the physics data plotting guide to inspect error bars, fits, and residuals. That habit turns a formula sheet into a repeatable physics problem-solving tool.